MITSUBISHI ELECTRIC CP700E - Manual (Page 49)

48
7. Setting the functions (Main menu)
3 ADDITIONAL Special print setting
S T R O B E
Function This function is to repeat storing the image in the memory according to selected the time interval.
When MULTI is set to “ON” , the image is stored in order of image number .
When MULTI is set to “OFF” , every one image is stored in the memory.
• The image is stored in the memory every time as shown below.
, 1/13 sec
→
1/5 sec
→
1/2.5 sec
→
1 sec
→
2 sec
→
5 sec
→
10 sec
→
30 sec ............ every second
, 1 min
→
2 min
→
5min
→
10min
→
30 min ..................................................................... every minutes
, 1hr .......................................................................................................................................... every hour
, Pressing the LEFT button to select the interval.
, The image is automatically printed after storing the image in the memory when “MEM&PRINT” function
is set to “ON” on “MEMORY SW MENU”
→
“KEY SETTING” menu.
Note: The monitor display may not be correctly shown when setting the time interval to lower value.
MULTI
Function Switching the multi-image print
ON ................ Multi-image prints are available
OFF .............. Multi-image prints are not available
Set the number of images (2,2s,4,16 image) in a print.
Set the number of images in a print and the size with MULTI, MODE, IMAGES, and SEPARATE menus.
Refer to pages 65-80 for multi-image print.
M O D E
Function Setting the print mode
SAME ......................... Print the image of the same scenes in a print.
DIFF ( Different ) ...... Print the image of the different scenes in a print.
PHOTO ..................... Portrait-like print
• When “MULTI” is set to “ON”, this function is displayed.
IMAGES
Function Selecting the number of image
“IMAGES” menu is changed depending on selecting the “MODE” function.
• When “MULTI” is set to “ON” , this function is displayed.
When selecting “SAME” or “DIFF” in the “MODE” function
2 .............. 2-images in a print (When printing on a L size paper, the image can be printed fully in width.
But the top and bottom of printed image will be lacked.)
2s ............ 2-images in a print (When printing on a L size paper, the image can be printed without lack.
But each of printed image size is reduced.)
4 .............. 4-images in a print
16 ............ 16-images in a print
When selecting “PHOTO” in the “MODE” menu
CARD ..... 16-multi images in a print (1.5 x 2.0cm size image)
3*4 .......... 4-multi images in a print (3.0 x 4.0cm size image)
5*5 .......... 2-multi images in a print (5.0 x 5.0cm size image)