MITSUBISHI ELECTRIC CP700E - Manual (Page 30)

29
6. Printing Procedures (Basic prints)
1
Selecting input signal
, Select “VIDEO” , “S-VIDEO” or “RGB” according to the input signal.
, The input signal can be set on the menu screen displayed on the monitor or LCD.
, It is not necessary to select the input signal everytime you print unless the input signal is changed.
1 Press the MENU
M E N U
button.
,
“MAIN MENU” is displayed.
2 Press the DOWN or UP button to select “2. SIGNAL SET
[ ] ]” .
3 Press the RIGHT button.
, “ 2. SIGNAL SET ” menu screen is displayed.
, Normally, “INPUT” is selected when opening the “2. SIGNAL SET [
]
]”
on step 2 . When other item is selected, press the UP or
DOWN button to select “INPUT” .
4 Press the RIGHT shift button to select “VIDEO” , “S-VIDEO” or “RGB” .
M a i n M e n u
1 . C O L O R A D J : P U S H [ > ]
M a i n M e n u
2 . S I G N A L S E T : P U S H [ > ]
S i g n a l S e t M e n u
I N P U T : R G B
S i g n a l S e t M e n u
I N P U T : V i d e o