24 5. features and functions, 3rear panel – MITSUBISHI ELECTRIC CP700E User Manual
Page 25
24
5. Features and Functions
1
S-VIDEO SIGNAL INPUT/OUTPUT TERMINALS [S-VIDEO]
Use these terminals to connect this unit to S-VIDEO signal equipment.
Refer to page 17 for connection.
2
VIDEO INPUT/OUTPUT TERMINALS [VIDEO]
Use these terminals to connect this unit to VIDEO signal equipment.
Refer to page 17 for connection.
3
RS-232C PORT [RS-232C]
Use this terminal to connect this unit to a device equipped with RS-232C interface.
Refer to pages 19 - 21 for connection.
4
EXTERNAL REMOTE TERMINAL [REMOTE 1]
Memorizing images are available by the remote signal inputted through this terminal. It is necessary to make a circuit for
remote control to use the function.
Refer to page 83.
5
EXTERNAL REMOTE TERMINAL [REMOTE 2]
Memorizing images and printing are available by the remote signal inputted through this terminal. It is necessary to make a
circuit for remote control to use the function.
Refer to pages 81 - 83.
6
POWER SOCKET [AC LINE]
This socket connects to the power cord (accessory).
Insert the cord firmly.
7
IMPEDANCE SELECTION SWITCH [IMPEDANCE RGB, SYNC. ]
This is a 75
Ω
/ HIGH impedance selection switch for RGB or Sync. signal.
8
RGB ANALOG OUTPUT TERMINALS [R,G/G+SYNC, G,H+V-SYNC]
This is a BNC type output terminal for a RGB analog signal. Sync. signal can be selected between 0.3V(H+V-SYNC.) and
TTL(H+V-SYNC.) signals.
Refer to page 18 for connection.
9
RGB ANALOG INPUT TERMINALS
[R,G/G+SYNC , B,H+V-SYNC ]
This is a BNC type input terminal for a RGB analog signal. The sync. signal can be automatically selected between H/V
composite and SYNC. ON GREEN (sync. signal imposed on the green video signal) signals. Refer to page 18 for switch
setting.
3
REAR PANEL
R G/G+SYNC B H+V-SYNC
R G/G+SYNC B H+V-SYNC
IN
OUT
S-VIDEO
REMOTE
AC LINE
VIDEO
75
Ω
HIGH
75
Ω
HIGH
IMPEDANCE
SYNC.
RGB
RS-232C
1
2
Potential equalization connector
This is used to equalize the potential of the equipment
connected to the unit.
For details, refer to the installation instruction of the
equipment to be connected.