MITSUBISHI ELECTRIC CP700E - Manual (Page 32)

31
6. Printing Procedures (Basic prints)
1
Setting print size (S/L)
1 Press the MENU button.
, “MAIN MENU” is displayed.
M a i n M e n u
2 . S I G N A L S E T : P U S H [ > ]
M a i n M e n u
4 . P R I N T : P U S H [ > ]
P r i n t M e n u
M O D E : S
P r i n t M e n u
M O D E : L
, Set the print size to “S” or “L” according to the ink sheet installed.
, The print size can be set on the menu screen displayed on the monitor or LCD.
, It is not necessary to set the size everytime you print unless the size of the ink sheet is changed.
2 Press the UP or DOWN button to select “4. PRINT PUSH [ ] ]”
.
3 Press the RIGHT button.
, “Print Menu” is displayed.
, When the power is turned on, “MODE:S/L” is already selected in
“4. PRINT PUSH [ ] ]” at step 2 . If other item is selected, press the
UP or DOWN button to select “MODE:S/L” .
4 Press the RIGHT or LEFT button to select “S” or “L” in the
“MODE” .