MITSUBISHI ELECTRIC CP700E - Manual (Page 33)

32
6. Printing Procedures (Basic prints)
5 Press the SET
SET
button.
, “CHANGE : OK” is selected.
, When changing the size setting selected at step 4 , press the RIGHT
button to select “CANCEL” . Press the SET
SET
button to
select “MODE : S/L” in “4.PRINT” again.
6 Press the SET
SET
button.
, The MAIN MENU is displayed.
7 Press the SET
SET
button.
, “SAVE PRG 1/2/3” is selected.
, This menu is used to store the setting in any one of 3 programs
(1, 2 or 3).
8 Press the RIGHT or LEFT button to select the program number 1, 2 or 3 to store the setting.
, The setting will be overlaid. In case of keeping the stored program, do not select the program number in which the
setting is stored.
9 Press the SET
SET
button.
, The source image (image from the input signal) is displayed.
, The setting of print size is completed.
P r i n t M e n u
C H A N G E : O K
M a i n M e n u
4 . P R I N T : P U S H [ > ]
M a i n M e n u
S A V E P R G : 1