49 7. setting the functions (main menu), 4print print setting 1 – MITSUBISHI ELECTRIC CP700E User Manual
Page 50
49
7. Setting the functions (Main menu)
SEPARATE
Function
Switching the white frame
Separate the each image in multi-image print with white frame
ON ................ White frame print
OFF .............. Normal print
• When “MULTI” is set to “ON”, this function is displayed.
4
PRINT Print setting 1
M O D E
Function
Selecting the paper size
Selecting the paper size depending on the installed the ink sheet.
S ................... S-size ink-sheet ( model: PK700S)
L ................... L-size ink-sheet ( model: PK700L)
• When installing L-size ink sheet or monochrome ink sheet and selecting “S” , the image can be
printed on S-size. Also the number of prints is as follows.
• When S size ink sheet is set, S-size printing is made even if “L” is selected in print mode.
GRAD (Gradation )
Function
Change the gamma curve of the image
Selecting the gamma curve from 3 types
NML ............. Normal
DEEP ........... Deep
ECHO ........... The gamma curve is set according to medical equipment.
,
If changing the setting value of gamma in ECHO, the value is able to change in “ECHO GAMMA
ADJ” on “MEMORY SW MENU”
→
“PRINT SETTING” menu.
The setting value in the “ECHO GAMMA ADJ” on the print setting menu is applied to “ECHO” .
Refer to page 63.
A P T
Function
Adjusting image outline.
This function is to control aperture and to reinforce or soften the contour.
SOFT [ S ] ............. Soften the contour
NML [ N ] ............. Do not perform APT
HARD [ H1 ] ............. Reinforce the contour
HARD [ H2 ] ............. More reinforce the contour
S
S
L
mode
S size print
(200 sheet)
S size print
(125 sheet)
L size print
(125 sheet)
Ink
sheet
S size print
(200 sheet)
L