45 7. setting the functions (main menu), 1color adj adjusting the color of the image – MITSUBISHI ELECTRIC CP700E User Manual
Page 46
45
7. Setting the functions (Main menu)
1
COLOR ADJ Adjusting the color of the image
,
With this menu, the color of the source image and memorized image can be adjusted.
,
This menu is also displayed by pressing color ADJUST
COLOR
ADJUST
button.
BRT (Bright )
Function
Adjust the brightness of printing image.
CONT (Contrast )
Function
Adjust the contrast of printing image
R-SUB ( Red-subcontrast)
Funciton
Adjust the red-subcontrast of printing image
B-SUB ( Blue-subcontrast)
Function
Adjust the blue-subcontrast of printing image
,
The each function and setting area is as follows.
display
adjusting
- 64
adjusting area
+ 63
B R T
Brightness
Darker ............................. Brighter
display
adjusting
- 32
adjusting area
+ 31
C O N T
Contrast
Less contrast ....................... More contrast
R-SUB
Red-subcontrast
Add cyan ........................... Add red
B-SUB
Blue-subcontrast
Add yellow ......................... Add blue
C E N T E R
Function
Each function setting value is initialized with the “COLOR ADJ” .
When CENTER is set to “ON” , the setting value of BRT, CONT, R-SUB and
B-SUB is reset to “0”.
ANALOG ADJ (Analog Adjust )
Funciton
Image adjustment menu of analog input signal is displayed.
When pressing RIGHT
button , “7.ANALOG ADJ” menu is displayed.