Minicom Advanced Systems DX System - Manual (Page 59)

USER GUIDE
58
16. Connect - Private
This option appears in the Action menu and is available to Administrators and to
Users with private connection rights. See page 48.
To activate Connect - Private:
1. Select the desired device.
2. From the Action menu select Connect - Private. Other Users are prevented
from viewing the selected computer.
17. Disconnect User
An Administrator can disconnect a user from any device.
To disconnect a user:
1. Select the desired server/device.
2. From the Action menu select Disconnect User. The user is disconnected from
the device.
18. Connecting to a local computer
When a DX User is connected to an optional local computer, select Action/Local
Computer to work on the local computer.
To exit the local computer, press left Shift, Shift.
Alternatively you can toggle between the DX AIM and the local PC by pressing the
hotkey - explained on page 43.
19. Updating the DX Central
To update the firmware, the DX system must be connected and switched on.
You update the DX Central firmware using the DX Central Update program which
is located on the Minicom Flash USB key. To obtain the latest firmware, go to
www.minicom.com and look in the Support menu. With the Update program you
can also check the DX central version number, change the DX Central settings,
restore factory defaults, backup the DX system database and load a saved database.
19.1 System requirements for the DX Central Update program
· Pentium class computer with 128 MB RAM and 10 MB free Hard Drive
space
· Windows 2000 or later