Minicom Advanced Systems DX System - Manual (Page 41)

USER GUIDE
40
11.5.1 Adding a new Power profile
To add new Power profile:
Click . The Add New Power Profile box appears, see Figure 45. The
information you need to type should be in the Power device instructions.
Figure 45 Add New Power Profile box
The Add New Power profile box elements
Power Profile Name - Give the profile a name.
Sockets No – Type the number of power sockets in the device.
Session Start/End. Power On/Off. Reboot – For this information see the power
device instructions.
Baud rate/Parity/Data Bits/Stop Bits/Flow Control - For this information see the
power device instructions.
Cascadable – When there are more of the same Power devices in the system, tick
this box. Then choose the number of cascaded Power devices from the drop-down
list.
Click Save to return to the Power device settings window. The added profile
appears in the list of profiles.
To edit a profile click . The Edit profile window appears –it has the
same elements as the Add New Power profile. Make the desired changes and click
Save.