beautypg.com

Digital x bus, I/o cards, Mic/line 4 card – MACKIE DIGITALXBUS X.200 User Manual

Page 54: Mic/line 8 card, Line card, Digital card, Aes/ebu card, Firewire card, X.200

background image

54

X.200

Digital X Bus

I/O Cards

You can install the optional I/O cards in any of the

slots labeled A, B, or C, in any combination to suit
your particular application. You can confi gure the
cards in the I/O Confi guration window (Windows >
I/O Confi guration).

Refer to Appendix B for wiring diagrams of the

various connectors used on the I/O Cards.

1. MIC/LINE 4 CARD

This card provides four analog mic/line inputs on

female XLR connectors, and four analog line-level
inputs on 1/4" TRS connectors, for a total of eight
analog inputs. Note that this card does not provide
any outputs.

2. MIC/LINE 8 CARD

This card provides eight analog mic- or line-level

inputs and eight line-level outputs. Connections are
made through two 25-pin D-Sub connectors.

3. LINE CARD

This card provides eight analog line-level inputs

and outputs. Connections are made through two 25-
pin D-Sub connectors.

4. DIGITAL CARD

This card provides eight digital inputs and eight

digital outputs. Connections are provided in both
ADAT Multichannel Optical Interface and Tascam
T/DIF-1 formats.

The connection for ADAT is made with a fi ber op-

tic cable, sometimes referred to as “lightpipe.” This
connection provides eight channels of digital audio.
You can purchase this cable from your Alesis dealer,
Monster Cable, Hosa, or other cable manufacturer.

The connection for T/DIF-1 is made with a 25-pin

D-Sub connector. This connection provides eight
channels of bidirectional digital audio. This con-
nection requires a 25-pin D-sub cable (Tascam Part
Number PW-88D).

5. AES/EBU CARD

This card provides eight digital inputs and eight

digital outputs in the AES/EBU standard format. Con-
nection is made through a 25-pin D-Sub connector.

AES/EBU is a standard two-channel digital proto-

col used for long balanced cable applications. Thus,
each conductor actually transmits two channels of
digital audio data.

6. FIREWIRE CARD

The FireWire card uses the IEEE-1394 protocol

for connecting digital devices. It currently provides
24 inputs and 24 outputs of digital audio at 48 kHz,
and 8 inputs and 8 outputs at 96 kHz.

WORD

CLOCK

SYNC CARD

IN

OUT

IN

OUT

SMPTE

A

B

MIX OUT CARD

SPDIF

SPEAKERS

PHONES

MIX OUT

IN

OUT

IN

L

R

1

2

L

R

L

R

OUT

AES/EBU

FIRE CARD

DIGITAL CARD

OPTICAL

TDIF

I/O

IN A

IN B

OUT A

OUT B

MIC/LINE 4 CARD

5

7

6

8

1

2

3

4

MIC/LINE 4 CARD

5

7

6

8

1

2

3

4

MIC/LINE 8 CARD

IN

OUT

I/O

AES CARD

OUT

IN

LINE CARD

OUT

LINE CARD

IN

SYNC

C • SLOTS

D • SLOT

B • SLOTS

A • SLOTS