MACKIE DIGITALXBUS X.200 - Manual (Page 48)

48
X.200
Digital X Bus
You can select multiple non-contiguous channels or
parameters by pressing the Ctrl key on the keyboard
(or on the console) while clicking on track names.
Pencil Tool (Hand Tool)
• Use this tool to enter new data nodes and to
alter existing ones.
• The Pencil tool can create and move new or cur-
rent automation nodes while time code is being
received (on the fl y editing—before or to the
left of the current time) or while time code isn’t
being received (at any point on the timeline).
Eraser Tool
• Use this tool to remove automation data. Click
on a node to remove it.
Magnify Tool
• Use this tool to select specifi c data lengths and
to expand the data time to fi ll the screen.
• Click and drag with the Magnify tool to zoom
into a specifi c area.
• Hold the Ctrl key while in magnify mode to
zoom out.
Auto Scroll
• The right pointing arrow button next to the
Magnify tool toggles Auto Scroll on and off.
• You can toggle Auto Scroll while time code is
running.
Nudge Arrows
• Click the Nudge Arrows button to open the
NUDGE window.
• You can move, or nudge, a selected region by an
amount indicated in the NUDGE window.
• You can select the nudge time (horizontal axis)
for nudging a selected region left and right by
entering a value in the box between the Left
and Right buttons. Click the box to open the
numeric entry window.
• You can select the nudge amount (vertical axis)
for nudging a selected region up and down by
entering a value in the box between the Up and
Down buttons. Click the + and – buttons to
change the nudge amount, or click the box to
open the numeric entry window. You can enter a
value from 1 to 100.
Delete, Cut, Copy, Paste Buttons
• These buttons perform the same editing func-
tions that appear in the Mix Editor menu.
• The editing function are applied to a selected
region, highlighted between the Edit In and Edit
Out markers.