Stovax Studio 22 - Manual (Page 6)

6
USER INSTRUCTIONS
EMERGENCy SHUT OFF
If the batteries fail during use of the fire, move the switch to
the OFF (O) position, Diagram 3
(This switch is set to be ON during normal operation and
must remain ON)
3
AR1933
3. CLEANING THE STUDIO
3.1 Make sure the fire and surrounds are cool before cleaning.
Use:
• A damp cloth for the painted frame
• Use soap and water to clean the glass
3.2 Opening the Glass Door
3.2.1 Steel Frame only
[If fitted with a Steel Frame, this needs to be removed
first:
• Lift the frame upwards off its four support brackets,
Diagram 4
4
AR2136
3.3 All models
Using the allen key provided to release the upper and lower
catches on the right side of the door:
• Slide the allen key into the gap between the door and
frame and locate the catch of the upper lock
• Push the allen key DOWN
• Slide the allen key into the gap and locate the lower lock
• Push the allen key UP
5
AR2119
AR2119
• Open the door outwards
When closing the door ensure the door catches are fully
engaged .
4. CHANGING THE STUDIO BATTERIES
The appliance batteries are located behind the wall switch
plate.
• Undo the two screws securing the wall switch and plate
and remove, Diagram 6
6
AR1887
• Correctly position the four new AA size batteries
• Re-assemble the battery holder as shown in Diagram 7
• Ensure the touch pad cable is tucked to the left on fitting
the wall plate back onto the wall, Diagram 7
PLEASE ENSURE NO WIRES ARE TRAPPED BEFORE
REPLACING THE WALL PLATE. THE TOUCH PAD LEAD
IS EASILy DAMAGED .