Stovax Studio 22 - Manual (Page 27)

27
INSTALLATION INSTRUCTIONS
INSTALLATION
11. LIGHTING THE STUDIO
Note: The Emergency Shut Off switch must be in the ON
position, refer to Section 2, User Instructions.
There are two ways of lighting the Studio:
• by thermostatic remote control
• using the fire’s touch pad
THERMOSTATIC REMOTE CONTROL
43
AR1883
To light the appliance using the handset:
• Press OFF and UP buttons simultaneously
You hear a beep as the ignition process begins.
TOUCH PAD CONTROL
44
• Press the ON-OFF button to light the appliance, (up to
30 seconds)
• Press the UP button to increase the flame height.
• Press the DOWN button to decrease the flame height. At
the lowest point it goes to ‘standby mode’, (only pilot
lit)
• Press the ON-OFF button to turn the appliance off.