Gateway 9315 - Manual (Page 95)

90 www.gateway.com
13
Reinstall the memory by following the instructions in “Installing memory” on
page 65 .
14
Reinstall the processors by following the instructions in “Installing a processor” on
page 76 .
15
Reinstall the fan module by following the instructions in “Replacing a system fan”
on page 75 .
16
Reattach the cables you removed in Step 7 .
17
Reinstall the PCI riser assembly by following the instructions in “Removing and
installing the PCI riser assembly” on page 69 .
18
Follow the instructions in “Installing the processor air duct” on page 42 .
19
Follow the instructions in “Closing the server case” on page 39 .
20
Turn on your server, then press F2 when the Gateway logo screen appears during
startup.
21
Check BIOS settings to make sure that they detect the server’s new hardware, then
save your changes (if any) and close the BIOS Setup utility.
22
If your server does not start after installing the new system board, contact Gateway
Customer Care. For more information, see
“Getting Help” on page 7 .