Gateway 9315 User Manual
Page 90
85
www.gateway.com
7
Push the battery retention clip away from the battery until the battery lifts up, then
remove the old battery. You can use a screwdriver to help lift the battery.
8
Make sure that the positive (+) side of the new battery is facing up, then press the
new battery into the socket until it snaps into place.
9
Follow the instructions in
“Closing the server case” on page 39
.
10
Turn on your server, then press F2 when the Gateway logo screen appears during
startup.
11
Restore any BIOS settings that you wrote down in
12
Save all your settings and close the BIOS Setup utility.