Gateway 9315 - Manual (Page 78)

73 www.gateway.com
5
Push back on the blue release lever at the end of the PCI riser connector. While holding
the lever back, push firmly on the other edge of the board to disengage the board
from the riser.
6
Place the PCI riser connector in a static-free bag for future use.
7
Line up the screws on the riser assembly with the slot and the large hole on the new
PCI riser connector.
8
Press and hold the blue riser locking lever, then place the PCI riser connector onto
the retention pins.
Riser
retention pin
Riser locking lever
PCI riser
connector