Force10 Networks PSeries 100-00055-01 - Manual (Page 94)

94 Appendix A
Parameters
Command
History
Example Figure 58
[root@localhost SW]# pnic linkup
No card number specified. Assuming card 0
No channel number specified. Assuming channel 0
Card 0, Channel 0 is up.
[root@localhost SW]#
pnic linkup Command Example
Related
Commands
pnic loadconf
Upload the runtime configuration parameters contained in the file /usr/local/pnic/0/pnic.conf.
Syntax
pnic loadconf [number]
Parameters
Command
History
number
Enter the number of the network interface card.
Range: 0-5
Default: 0
channel
Enter the channel number
Range: 0-1
Default: 0
Version 2.0.0.1 Introduced
pnic linkdown Enable the physical link ports.
number
Enter the number of the network interface card.
Range: 0-5
Default: 0
Version 2.3.0.0 Introduced