Pnic passive-mode-enable – Force10 Networks PSeries 100-00055-01 User Manual
Page 103
![background image](/manuals/106470/103/background.png)
P-Series Installation and Operation Guide, version 2.3.1.2
103
Command
History
Example
Figure 67 pnic passive-mode-disable Command Example
[root@localhost SW]# pnic passive-mode-disable
No card number specified. Assuming card 0
Channel 0 and 1 are set to work in normal TX/RX mode.
[root@localhost SW]#
Related
Commands
pnic passive-mode-enable
Configure the ports to only receive traffic.
Syntax
pnic passive-mode-enable
[
number
]
Disable passive mode using the command
pnic passive-mode-disable
.
Parameters
Command
History
Example
Figure 68 pnic passive-mode-enable Command Example
[root@localhost SW]# pnic passive-mode-enable
No card number specified. Assuming card 0
Channel 0 and 1 are set to work in passive mode.
[root@localhost SW]#
Related
Commands
Version 2.3.0.0
Introduced
Configure the ports to only receive traffic.
number
(OPTIONAL) Enter the number of the network interface card.
Range: 0-5
Default: 0
Version 2.3.0.0
Introduced
Receive both client-to-server and server-to-client traffic on
one port.