Resolving ribbon wrinkle problems, Resolving ribbon wrinkle problems -42 – FARGO electronic DTC400 User Manual
Page 99
RESTRICTED USE ONLY
Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
4-42
Resolving Ribbon Wrinkle problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1
Review the following information.
•
Symptom: Printed cards have off-colored lines or streaks on them.
•
Printer Error State: None
•
LCD Error Display: None
•
Driver Monitor Error Display: None
2
Confirm that the Printer is using the most current Driver via:
3
Reduce the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See the Using the Image Color tab.
Continued on the next page