FARGO electronic DTC400 - Manual (Page 210)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 6-3
Using the Required Supplies
For the maintenance procedures outlined for the Printer, you will need a Printer Cleaning Kit,
available from the reseller. This kit includes the following:
• Printhead Cleaning Swabs pre-moistened with 99.99% isopropyl alcohol for cleaning the
Printer's Printhead.
• Cleaning Cards with an adhesive backing for cleaning the Printer's Card Feed Rollers
and Platen Roller.
• Cleaning Pads pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer's
general inside and outside area.
Caution: As with any electronic device, internal components of the Printer, such as
the Printhead, may be damaged if exposed to static electrical discharges.
• To avoid potential damage, always wear an appropriate personal grounding device, such
as a wrist strap (with integral resistor) connected to an ESD ground.