FARGO electronic DTC400 - Manual (Page 13)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 1-6
Reviewing the DTC400/DTC300/DTC300M Sequence of Operations (continued)
Step Process
23 The Card Feed Stepper Motor engages to queue card for magnetic encoding.
24 The Encoding data is written to the card.
25 The Card Feed Stepper will re-queue card for each verification pass required.
26 After Ribbon advances a few encoder clicks, assume Ribbon free of card. All Stop.
27 Repeat steps 9 through 23 for appropriate number of color/overlay panels.
28 The Card is ejected from the Printer.
29 All Stop.