Reviewing the iso track locations, Reviewing the iso track locations -48 – FARGO electronic DTC400 User Manual

Page 158

Text mode
Original mode

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)

5-48

Reviewing the ISO Track Locations

Review the magnetic encoding module, which encodes onto tracks in accordance with an
ISO 7811-2 Magnetic Stripe. (Note: Refer to the diagram (below) for track locations.)

TRACK1 0.110"

TRACK2 0.110"

TRACK3 0.110"

0.130"

0.140"

0.223" 0.353" 0.493"