FARGO electronic DTC400 User Manual

Page 243

Text mode
Original mode

RESTRICTED USE ONLY

Fargo Electronics, Inc.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)

10-25

Selecting the Card Samples tab in the Diagnostics Utility

Step Procedure

a. Select the Card Samples tab to print sample images from the Printer.
b. Select the desired Image, as shown below. (Note: You will see the

enlarged Image after you select it from several options.)

c. Check the settings defined in your Driver before printing your selection.
d. Click on the Print button when you are ready, as shown below. (Note: The

default Card Size is CR-80, a shown below.)