FARGO electronic DTC400 - Manual (Page 87)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-30
Resolving a Card Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Card is jammed.
• Printer Error State: Card TOF Sensor is detecting no card motion
• LCD Error Display: Card Jam
• Driver Monitor Error Display: Card Jam
Continued on the next page