FARGO electronic DTC400 - Manual (Page 272)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 2
Section 15: Index
A
About button, 5-15
AC - Alternating Current, 14-1
Accepted Card Thickness, 2-3
Accepted Card Types, 2-3
Accepted Standard Card Sizes, 2-3
Access Card, 14-1
Adhesion, 14-1
Adjusting the Image Darkness, 4-41, 4-43
Agency Listings, 2-3
Algebraic, 5-18, 14-1
ANSI (American National Standards
Institute), 14-1
AS400, 14-1
ASCII (American Standard Code for
Information Interchange), 14-1
ASCII Code, 5-50
ASCII Offset, 5-45
AT, 14-1
B
B (Black), 14-1
Barcodes, 14-2
Batch print, 14-2
Battery Back-up, 14-2
Bi-directional, 14-2
BIOS (Basic Input/Output System), 14-2
Bit, 14-2
Bit Density, 5-42
Bit map, 14-2
blocked Sensor, 4-33
Board, 14-2
Boot-up, 14-2
Buffer, 14-2
C
Cable, 14-2
Cache, 14-3
Calibrate tab, 4-36, 4-47, 5-33
Calibrating, 14-3
Cancel button, 2-9
Card Cleaning Roller, 2-9
Card Design, 2-14
Card Feeding Errors, 4-7, 4-8, 4-10, 4-
12, 4-15, 4-16, 4-18, 4-20, 4-22, 4-25, 4-
27, 4-29, 4-31, 4-33
card grid, 5-58
card grid area, 5-57
card grid lines, 5-59
card input, 5-89
Card Input Hopper, 2-9
Card Input Hopper Capacity, 2-3
card orientation, 5-60
card output, 5-89
Card Size, 2-14
card stock scratches, 4-38
Card Surface, 2-14
cards look pixilated or grainy, 4-50
CD (Compact Disc), 14-3
Centronics, 14-3
Character, 5-50
Character ASCII Offset, 5-45
Character Parity, 5-46
Character Size radio buttons, 5-43
Cleaning Card Feed/Cleaning Rollers, 6-5
Cleaning Cards, 6-3
Cleaning Inside Printer, 4-39
Cleaning Pad, 6-6
Cleaning Pads, 6-3
Cleaning Printer's Interior, 6-6
Cleaning Roller, 14-3
Cleaning the Printhead, 4-38
Clear Protective Overlay Panel, 2-10
Coercivity, 14-3
Color matching, 14-3
Color Matching, 5-18
Color Matching software, 5-18
Colored Resin, 2-11
Colors, 2-3
Communication Errors, 4-4, 4-5
Compressed air, 14-3
Contrast, 14-3
Contrast / Gamma, printed image, 5-29
Control panel, 14-3
CR-100, 14-4
CR-79, 14-4
CR-80, 14-4