Chipset setup – FANUC Robotics America V7865* User Manual
Page 96
96
B
V7865 Product Manual
Chipset Setup
Select the various options for chipsets located in the system (for example, the CPU
configuration and configurations for the North and South Bridge). The settings for the
chipsets are processor dependent and care must be used when changing settings from
the defaults set at the factory. Below is a sample of the Chipset Setup screen. The
actual options on your system may vary.
NOTE:
Changes in this screen can cause the system to malfunction. If problems are
noted after changes have been made, reboot the system and access the BIOS. From the
Exit menu select ‘
Load Failsafe Defaults
’ and reboot the system. If the system failure
prevents access to the BIOS screens, refer to Chapter One for instructions on clearing
the CMOS.
v02.59 (C) Copyright 1985-2005, American Megatrends, Inc
.
NOTE:
Options shown may not be available on your system.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Advanced Chipset Settings
Intel Montara GML
NorthBridge chipset
Configuration options.
←→
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
WARNING: Setting wrong values in below section
may cause system to malfunction.
NorthBridge Configuration
SouthBridge Configuration
VME Bridge Configuration
Onboard Devices Configuration