FANUC Robotics America V7865* - Manual (Page 38)

38
1
V7865 Product Manual
In addition, the front panel LEDs are used to indicate various modes of operational
status that can occur with the V7865. The table below is a summary of these
indications.
Table 1-9 Status Indications
State Indication
VME SYSFAIL Red “B” LED illuminates with each VME SYSFAIL ‘seen’
on the bus. The LED will remain on as long as the failure
lasts.
Normal Operation LED B = Off (out of Power On Self Test - POST)
LED P = On (power is good)
LED H = Off, or Flashing (hard drive activity)
LED T = Off (temperature of CPU is within operating
limits)