FUJITSU Sparc Enterprise Server T5440 User Manual
Page 58
42
SPARC Enterprise T5440 Server Administration Guide • July 2009
Note –
The question in
TABLE: Expected Behavior of Halting or Rebooting the
Control (primary) Domain on page 42
regarding whether domaining is enabled
pertains only to the UltraSPARC T1 processors. Otherwise, domaining is always
enabled.
TABLE:
Expected Behavior of Halting or Rebooting the Control (primary) Domain
Command
Domaining
Enabled?
Other Domain
Configured?
Behavior
halt
Disabled
N/A
For UltraSPARC T1 Processors:
Drops to the ok prompt.
Enabled
No
For UltraSPARC T1 Processors:
See message in 02.
For UltraSPARC T2 Processors:
Host powered off and stays off until powered
on at the SC.
Enabled
Yes
Soft resets and boots up if the variable
auto-boot?=true
. Soft resets and halts at
ok prompt if the variable auto-boot?=
false
.
reboot
Disabled
N/A
For UltraSPARC T1 Processors:
Powers off and powers on the host.
Enabled
No
For UltraSPARC T1 Processors:
Powers off and powers on the host.
For UltraSPARC T2 Processors:
Reboots the host, no power off.
Enabled
Yes
For UltraSPARC T1 Processors:
Powers off and powers on the host.
For UltraSPARC T2 Processors:
Reboots the host, no power off.
shutdown -i 5
Disabled
N/A
For UltraSPARC T1 Processors:
Powers off the host.
Enabled
No
Host powered off, stays off until powered on
at the SC.
Enabled
Yes
Soft resets and reboots.