FUJITSU Sparc Enterprise Server T5440 - Manual (Page 48)

32 SPARC Enterprise T5440 Server Administration Guide • July 2009
2. At the ILOM -> prompt, type:
3. At the ok prompt, type:
4. To cause the parameter changes to take effect, type:
The systems permanently stores the parameter changes and boots automatically
when the OpenBoot configuration variable auto-boot? is set to true (its default
value).
Related Information
■ “Display the ok Prompt” on page 4
■ “Disable Automatic System Recovery” on page 32
■ “Automatic System Recovery” on page 31
▼ Disable Automatic System Recovery
1. Log in to ILOM.
See “Log In to ILOM” on page 28
2. Display the ok prompt.
See “Display the ok Prompt” on page 4 .
3. At the ok prompt, type:
-> set /HOST/diag mode=normal
-> set /HOST/diag level=max
-> set /HOST/diag trigger=power-on-reset error-reset
ok setenv auto-boot? true
ok setenv auto-boot-on-error? true
ok reset-all
ok setenv auto-boot-on-error? false