FUJITSU Sparc Enterprise Server T5440 - Manual (Page 51)

Manage the System 35
▼ Configure a Device Manually
1. Log in to ILOM.
See “Log In to ILOM” on page 28 .
2. At the ILOM -> prompt, type:
Related Information
■ “Devices and Device Identifiers” on page 35
■ “Unconfigure a Device Manually” on page 34
Devices and Device Identifiers
The device identifiers are case sensitive.
Related Information
■ “Unconfigure a Device Manually” on page 34
■ “Configure a Device Manually” on page 35
-> set Device_Identifier component_state=enabled
TABLE:
Device Devices Identifiers
System fan (0-3) /SYS/MB/FT n
Hard disk drive (0-3) /SYS/HDD n
DVD-ROM /SYS/DVD
Power supply (0-3) /SYS/PS n
Ethernet port (0-3) /SYS/MB/NET n
Network management port /SYS/MB/NETMGT
Serial management port /SYS/MB/SERMGT
USB port (0-3) /SYS/MB/USB n
PCI-E slot (0-7) /SYS/MB/PCIE n
XUAI 10GbE slot (0-1) /SYS/MB/XUAI n
DB-9 serial port /SYS/TTYA