FUJITSU Sparc Enterprise Server T5440 - Manual (Page 24)

8 SPARC Enterprise T5440 Server Administration Guide • July 2009
2. Switch from the system console prompt to the service processor console prompt.
Type:
3. From the ILOM -> prompt, type:
Note – To perform an immediate shutdown, use the stop -force -script /SYS
command. Ensure that all data is saved before entering this command.
Related Information
■ “Power On the System” on page 7
■ “Reset the System” on page 8
▼ Reset the System
It is not necessary to power the system off and on to perform a reset.
● To reset the system, from the Solaris prompt, type:
Related Information
■ “Power On the System” on page 7
■ “Power Off the System” on page 7
Jun 12 19:46:57 wgs41-58 syslogd: going down on signal 15
svc.stard: The system is down.
syncing file systems...done
Program terminated
r)eboot o)k prompt, h)alt?
ok #.
->
-> stop /SYS
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
->
# shutdown -g0 -i6 -y