FUJITSU Image Scanner fi-6130 User Manual
Page 42
2.5 How to Use the Scanner Drivers
Halftone
You can select a halftone pattern. This setting is available when [Black and White] is selected under [Mode].
Dither Pattern 0
This setting is suitable for scanning highly-colored photographs.
Dither Pattern 1
This setting is suitable for scanning highly-colored documents containing both
text and photographs.
Dither Pattern 2
This setting is suitable for scanning lightly-colored photographs.
Dither Pattern 3
This setting is suitable for scanning lightly-colored documents containing both
text and photographs.
Error Diffusion
This function minimizes differences between a target pixel and pixels near the
target.
Download
This function processes gray tone images with the dithered pattern
downloaded.
Cropping
Select how to crop scanned document images to output.
Fixed
Scanned document images are output in a specified size.
Detect Length
The rear end of a scanned document is detected and scanning is performed
for the original length. When shorter sheets are included in a batch of
documents to scan, output images are adjusted to their original size.
Automatic
The page size of the scanned documents is automatically detected and the
images are output in the detected page size. The skew of documents is also
automatically detected and corrected to output correct images.
Long Page
The page size of the scanned long page document is automatically detected
and the images are output in the detected page size. The skew of the
documents is also automatically detected and corrected to output correct
images.
Brightness
You can set the brightness of the entire image. Specify a number from 1 (darkest) to 255 (brightest) as the brightness
value. The higher the value, the brighter the image. The lower the value, the darker the image.
Contrast
You can set the contrast of the scanned image. Specify a number from 1 (low [soft]) to 100 (high [sharp]) to increase
brightness for the entire image. Select a higher value to emphasize the difference in brightness between the light and
dark areas of the image.
[Layout] Tab
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/02/c02_05_01.htm (7/16) [2008/10/30 15:13:56]