FUJITSU Image Scanner fi-6130 - Manual (Page 222)

APPENDIX 1 Before Using the [Scan] or [Send to] Button
●
When using the [Send to] button
Press the [Function] button to switch the number displayed on the Function Number Display.
Use the same number assigned to the event configured on the computer (by selecting a number from 1 to 9 then
pressing the [Send to] button).
Pressing the [Send to] button starts up the application configured.
HINT
●
To perform the event configured with "Send to 2", for example, display [2] on the
Function Number Display.
●
Each time the [Function] button is pressed, the number displayed changes as follows:
1, 2, 3, …9, C, 1, 2, 3, ….
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6130_6230_Lynx...OG/R02/02_081030/contents/EN/App/cApdx01_01.htm (4/4) [2008/10/30 15:15:22]