FUJITSU Image Scanner fi-6130 - Manual (Page 192)

8.2 Power Saving Setting
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
8.2 Power Saving Setting
This scanner switches to Power saving mode automatically to save power consumption when it remains unused for a
certain time.
To configure the Power saving mode, do the following:
1. Start up the Software Operation Panel.
See Section " 8.1 Scanner Settings. "
2. Select [Device Setting] from the left side list in the window.
3. Use the slide control bar to set the waiting time before entering the power saving mode.
You can set the waiting time in the range of 15 to 55 minutes (in steps of 5 min.).
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/08/c08_02_01.htm [2008/10/30 15:15:01]