Descriptions – FUJITSU Image Scanner fi-6130 User Manual
Page 127
3.18 Not Detecting Multifeed for Fixed Format
Auto-cancel Timer:
Scanning is not restarted for the set period of time (minutes) after a multifeed error. If scanning is not
started after the set minutes, the application is notified of the error by the driver. Note that if the Auto-
cancel Timer is set to 0, the application will never be notified of the error.
3. In the Software Operation Panel or driver dialog box, select [Check Overlapping] or [Check
Overlapping and length difference]. In addition, specify an area in which a multifeed error is
detected, under [Document check area specification] (Preferences) in the Software Operation
Panel dialog box.
The Intelligent Multifeed Function bypasses multifeed errors within the specified area.
4. Select [Intelligent Multifeed Setting] in the Software Operation Panel, and then select one of the
three modes described above.
Descriptions
1. After a multifeed error, press the [Send to] button to eject sheets from the transport path, or open
the cover and remove sheets from the transport path. Return the ejected or removed sheets onto
the ADF paper chute. When the sheets are removed, the function number displayed changes as
follows:
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/03/c03_18_01.htm (5/6) [2008/10/30 15:14:44]