FUJITSU Image Scanner fi-6130 - Manual (Page 166)

6.3 Remedying Typical Troubles
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
6.3 Remedying Typical Troubles
Symptom: Vertical lines appear in the scanned image.
Back
Did you scan the document with the Flatbed?
(fi-6230 only)
YES
Clean the document bed of the Flatbed.
(For details on how to clean the document bed
of the Flatbed, see Section " 4.2 Cleaning the
Flatbed [fi-6230]. ")
NO
Are the upper/lower glasses and rollers of the
ADF dirty?
YES
Clean the upper/lower glasses and rollers
inside the ADF.
(For details on how to clean the glasses and
rollers, see Section " 4.3 Cleaning the ADF. ")
NO
Is there any debris (paper powder or dust) on
the document?
YES
Remove the debris from the document.
Such debris on the document may be
transferred onto the upper/lower glasses and
rollers inside the ADF or the document holding
pad of the Flatbed (fi-6230 only), producing
vertical lines in the scanned image.
NO
Do the lines disappear on images with low
resolution settings?
YES
After this, scan the documents with low
resolution settings.
NO
If you cannot solve the problem after taking
measures, check the items in Section " 6.4
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/06/c06_03/07.htm [2008/10/30 15:13:19]