FUJITSU Image Scanner fi-6130 - Manual (Page 27)

2.1 Turning the Scanner ON
The Power Save mode keeps the scanner in a low-powered state after it has been turned ON.
If no operation is performed on the scanner for 15 minutes, the scanner automatically switches to the Power Save mode.
In the Power Save mode, the indication of the Function Number Display on the operator panel goes out, but the Power LED
stays lit in green.
To return from the Power Save mode, perform one of the following:
●
Load the document on the ADF paper chute.
●
Press any button on the operator panel.
The scanner will be turned OFF when pressing down the Power button for at least two seconds.
●
Execute a command from the scanner driver.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/02/c02_01_01.htm (5/5) [2008/10/30 15:13:43]