FUJITSU Image Scanner fi-6130 - Manual (Page 182)

7.2 Document Quality
Dimensions: 3.4 inch (height) x 2.1 inch (width)/ 86 mm x 54 mm
Thickness: 0.056 inches / 1.4 mm or less
Material:
PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)
Note: Before scanning your card, test with a dummy card of the same material to
see if it can be fed into the ADF properly.
●
Cards that are excessively rigid or less flexible may not feed smoothly and excessive
noise may occur.
Note: If the cards do not feed smoothly, try:
- Scanning one card at a time.
- Enabling [Automatic Paper Size Detection]. For how to configure this setting, see
Section " 3.10 Correcting Skewed Documents. "
- Raising the resolution.
●
Cards should be clean from oil and without labels.
●
Cards cannot be scanned when the imprinter is installed.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/07/c07_02_01.htm (3/3) [2008/10/30 15:14:52]