FUJITSU Image Scanner fi-6130 - Manual (Page 212)

8.12 Power ON/OFF Control Setting
fi-6130 / fi-6230 Image Scanner Operator's Guide
TROUBLESHOOTING
CONTENTS MAP
TOP
8.12 Power ON/OFF Control Setting
You can select how to power the scanner on/off; by pressing the Power button, or by connecting/disconnecting the AC cable.
You can also set up to turn on/off the scanner in conjunction with the computer power on/off, if the scanner is connected
to the computer through an USB cable.
Configure the settings for power on/off control as follows.
1. Start up the Software Operation Panel.
See Section " 8.1 Scanner Settings. "
2. Select [Device Setting 2] from the left side list in the window, and select [Power SW Control] from
its lower level.
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/08/c08_12_01.htm (1/2) [2008/10/30 15:15:15]