Fortress Technologies ecure Wireless Access Bridge - Manual (Page 71)

Fortress Bridge: Administration
61
4.3.2 Deleting Trusted Devices
You can delete Trusted Devices one at a time, or by selecting
multiple devices for deletion.
1 Log on to the Bridge GUI admin account and choose
TRUSTED DEVICES from the menu on the left.
2 On the TRUSTED DEVICES screen, in the MANAGED TRUSTED
DEVICES frame, check the box(es) beside the Trusted
Device(s) you wish to delete and click Delete at the bottom
of the frame.
The selected Trusted Device(s) will be removed from list of
MANAGED TRUSTED DEVICES .
4.3.3 Visitor Access through Trusted Devices
Visitors using their own mobile devices at your facilities can be
granted temporary access to the WLAN by configuring Trusted
Device access for their devices, with appropriately limited port
access.
Trusted Devices for visitors are managed no differently from
other Trusted Devices.
4.4 SNMP Settings
NOTE: You cannot
configure SNMP
monitoring on a For-
tress Bridge in
FIPS op-
erating mode (the
default). Refer to Sec-
tion 3.6.1 for more infor-
mation about Bridge
operating modes and to
Section 6.4.5.5 for de-
tails on changing it.
The Fortress Bridge can be configured for monitoring through
SNMP (Simple Network Management Protocol) versions 1 and
2. The Fortress MIB (management information base) is
included on the Bridge CD and available from:
https://www.fortresstech.com/support/products_updates.asp .
SNMP monitoring is configured through these settings:
‹ SNMP - determines whether SNMP is Enabled or Disabled
on the Bridge, according to your selection on the dropdown.
‹ System Location - identifies the Fortress Bridge.
‹ System Contact - specifies the E-mail address to which
SNMP notifications are sent.
‹ Read Only Community - identifies the SNMP read-only
community.
‹ Read/Write Community - identifies the SNMP read/write
community.
detail: