5 beacon interval, 6 multicasting, Beacon interval multicasting – Fortress Technologies ecure Wireless Access Bridge User Manual
Page 38

Fortress Bridge: Configuration
28
3.3.2.5
Beacon Interval
The Bridge’s radios transmit beacons at regular intervals to
announce their presence on the network. You can configure
the number of milliseconds between beacons in whole
numbers between
25
and
1000
. You cannot disable the
beacon.
The default beacon interval is
100
milliseconds.
3.3.2.6
Multicasting
Wireless is an inherently broadcast medium. A multicast
packet, like any other, is broadcast (by the root Bridge) to all
nodes (non-root Bridges) on the wireless network. Each non-
root Bridge then examines the packet and:
If the Bridge is an intended receiver, it accepts the packet.
and/or
If the Bridge is serving as a repeater for an outlying Bridge
that is an intended receiver, it passes the packet along this
route.
or
If the Bridge is neither an intended receiver nor the
repeater for an intended receiver, it drops the packet.
Non-root Bridges on which
Multicast
is disabled will drop all
multicast packets.
The
Multicast
function applies exclusively to non-root Bridges,
and so can only be
Enabled
on Bridges with a
Radio Mode
setting of
Bridge
and a
Bridge Mode
setting of
Non-Root
.
The
Multicast
field is grayed out for Bridges with a
Radio Mode
of
AP
or with a
Bridge Mode
of
Root
.
The
Multicast
field is also grayed out for Bridge’s with
STP
Enabled
on the
LAN
SETTINGS
screen. Because STP requires
multicasting capability,
Multicast
is automatically
Enabled
(and
the field that configures the setting is grayed out) when
STP
is
detail: