Fortress Technologies ecure Wireless Access Bridge User Manual
Page 23
Fortress Wireless Access Bridge: Installation
13
1
Open a browser application on a computer on your LAN
and, in the browser address field, enter the Bridge’s default
IP address:
192.168.254.254
.
2
Log on to the Bridge GUI, entering
admin
as both User ID
and Password and then clicking
Login
.
(When prompted, agree to accept the security certificate.)
3
From the main menu on the left choose
LAN
SETTINGS
, and
on the
LAN
SETTINGS
screen:
In Host name, enter a descriptive name for the Fortress
Bridge.
NOTE:
The IP ad-
dress must be
unique on the network.
In LAN IP address, enter a network address for the
Fortress Bridge’s management interface (the address
to be used for all subsequent administrative access to
the Bridge).
In LAN Subnet mask, enter the correct subnet mask for
the Bridge’s IP address.
In Default gateway, enter the IP address of the default
gateway (or router) for the network on which you are
installing the Bridge.
NOTE:
For infor-
mation about the
Bridge’s
STP
and
WAN
Port
encryption features
If the WAN port is connected to a satellite link or a DSL
or cable modem, select
Clear
for WAN Port.
Click
Apply
.
4
Click
OK
to clear the system dialog that instructs you to
reboot, but do not reboot until Step 10 of these procedures,
when you are again instructed to do so.