In step 8 – Fortress Technologies ecure Wireless Access Bridge User Manual
Page 25

Fortress Wireless Access Bridge: Installation
15
NOTE:
If you are
deploying multi-
ple Fortress Bridges in a
point-to-point/multi-
point network they
must be correctly con-
figured for their net-
work roles, typically
with one serving as the
root node and the rest
configured as non-root
nodes (refer to Section
2.2 for more detail).
8
If the Fortress Bridge is the root node in the point-to-point/
multipoint deployment, skip this step.
or
If the Fortress Bridge is the non-root node in the point-to-
point/multipoint deployment, choose
RADIO
SETTINGS
from
the main menu and in Bridge Mode setting for Radio 2,
choose
Non-Root
, and click
Apply.
9
From the main menu on the left choose
SYSTEM
OPTIONS
, and
on the
SYSTEM
OPTIONS
screen, in the
SET
SYSTEM
TIME
section, enter the correct date and time in the fields
provided, using two-digit values (
hh
:
mm
MM
:
DD
:
YY
), and click
Apply
.
NOTE:
The
SYSTEM
OPTIONS
screen
features an information-
al timestamp under
SET
SYSTEM
TIME
. The re-
fresh function of your
browser updates this
timestamp.
10
On the same screen, under
REBOOT
SYSTEM
, click
OK
.
11
Click
OK
again to clear the system dialog.
12
Close your browser.
detail:
detail:
detail: