Fortress Technologies ecure Wireless Access Bridge - Manual (Page 24)

Fortress Wireless Access Bridge: Installation
14
5 From the main menu, select
SECURITY SETTINGS
, and on the
SECURITY SETTINGS screen, in the CHANGE ACCESS ID
section:
™ In Current Access ID enter 16 zeros or the word
default .
™ In New Access ID enter the 16-digit hexadecimal
Access ID to be used by the Bridge and its Secure
Clients.
CAUTION: For se-
curity reasons, the
Access ID in effect on
the Bridge cannot be
displayed. Make a note of
the new Access ID: you
will need it to configure
the Bridge’s Secure Cli-
ents, as well as to
change the Access ID on
the Bridge.
™ In the Confirm New Access ID field, re-enter the new
Access ID to ensure against entry errors.
Click Apply .
CAUTION: The
Bridge is not se-
cure until you have
changed the default Ac-
cess ID and wireless
SSIDs and reset both
GUI passwords and the
CLI password to a mini-
mum of eight, mixed al-
phanumeric, upper- and
lowercase characters.
6 From the main menu on the left choose BRIDGE PASSWORD ,
and on the BRIDGE PASSWORD screen:
™ Leave User Name at its default setting, admin .
™ In Current Password, enter the default system
administrator password:
admin .
™ In New Password, enter the password to be used to
access administrative functions on the Bridge GUI.
™ In Confirm New Password, re-enter the new password.
Click Apply .
7 On the same PASSWORD screen, repeat Step 6, except in
User Name, select operator from the dropdown menu.
detail:
detail: