Furuno FSV-24 - Manual (Page 57)

3-9
3.4.2 EXT DATA SETTING menu
EXT DATA SETTING
LOG PULSE : 200p/NM
MENU QUIT
QUIT
SPEED&COURSE : NMEA
HEADING : AD10S
DATE&TIME : CIF
SPEED SENSOR : GPS/DR
LAT/LON : NMEA
POSITIONING SENSOR : AUTO SEL.
WATER DEPTH : NMEA
WATER TEMP. : NMEA
WATER CURRENT : CIF
WIND
: CIF
EXT DATA SETTING menu
DATE & TIME
Select input port of data and time data. (NONE, CIF, NMEA)
HEADING
Select input port of the heading data. (NONE, AD10S, CIF, NMEA)
LOG PULSE
Set the pulse rate per 1 nm for the distance pulse signal. (200 p/NM, 400 p/NM)
SPEED & COURSE
Select the input port for the ship’s speed and course data input. When selecting
the LOG&HEADING, the heading data is used instead of the course data.
(NONE, LOG&HEADING, CIF, NMEA)
SPEED SENSOR
Select the source for the speed and course data. This setting is ineffective when
LOG&HEADING is selected as speed and course source. (NONE, GPS/DR,
DOPPLER/DR)
LAT/LON
Select the input port for the ship’s position data. (NONE, CIF, NMEA)
POSITIONING SENSOR
Select the type of the navigator. When selecting AUTO SEL., the priority is
GPS/DR>LORAN-C. (LORAN-C, GPS/DR, AUTO SEL.)