Furuno FSV-24 - Manual (Page 50)

3-2
3. Select INITIAL SETTING and press the [MENU] key.
CAUTION
THIS ITEM IS DEFINED AS NON-
CHANGEABLE ITEM, ARE YOU
SURE TO CHANGE IT TO CHANGEABLE ?
NO
YES
4. Select YES and press the [MENU] key.
INITIAL SETTING
OTHERS
MENU QUIT
QUIT
QUIT
MARK DISPLAY...
MARK SIZE...
DATA DISPLAY...
CURRENT VEC & WIND...
NET SONDE SETTING...
NET SHOOT SETTING...
TARGET LOCK...
STABILIZATION...
TEST...
INITIALIZATION...
INITIAL SETTING menu
5. Select TEST and press the [MENU] key.
INITIAL SETTING
OTHERS
MENU QUIT
QUIT
BOARD TEST...
PANEL TEST...
TEST PATTERN...
RX TEST...
NOISE TEST...
TX : ON
QUIT
TEST QUIT
TEST MENU
6. Select TX and press the [MENU] key.
7. Select OFF and press the [MENU] key.
8. Select QUIT at the top of the menu screen and press the [MENU] key.