Furuno FSV-24 - Manual (Page 54)

3-6
3.3 Configuring Own Ship Mark
Set own ship’s dimensions and the location of the transducer to accurately
display the own ship mark on the display.
1. Press the [MENU] key to display the SYSTEM menu.
SYSTEM MENU QUIT
INTERFACE SETTING..
EXT DATA SETTING..
OWN SHIP MARK..
TEST&INITIALIZATION..
TRX SETTING 1..
TRX SETTING 2..
OTHERS..
System menu
2. Use the trackball to select OWN SHIP MARK and press the [MENU] key.
OWN SHIP MARK
TD POSITION 1 : 15m
MENU QUIT
QUIT
TD POSITION 2 : 0.0m
SHIP'S WIDTH : 20m
SHIP'S LENGTH : 75m
OWN SHIP MARK menu
3. Use the trackball to select SHIP’S LENGTH.
4. Press the [MENU] key to show the setting window.
OWN SHIP MARK
TD POSITION 1 : 15m
MENU QUIT
QUIT
TD POSITION 2 : 0.0m
SHIP'S WIDTH : 20m
SHIP'S LENGTH : 75m
QUIT
CANCEL
OWN SHIP MARK menu, setting window