FUJITSU M8000 - Manual (Page 469)

showtelnet(8)
System Administration 447
NAME showtelnet - display the current status of the Telnet service for the XSCF network
SYNOPSIS showtelnet
showtelnet -h
DESCRIPTION showtelnet (8) command displays the current status of the Telnet service for the
XSCF network.
One of the following states is displayed:
Privileges You must have one of the following privileges to run this command:
useradm , platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop , fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXTENDED
DESCRIPTION
The settelnet(8) command makes settings for the Telnet service in the XSCF
network.
EXAMPLES EXAMPLE 1 Displays the status of the Telnet service for the XSCF network.
EXIT STATUS The following exit values are returned:
SEE ALSO settelnet(8)
enable The Telnet service is enabled.
disable The Telnet service is disabled.
-h Displays usage statement.
XSCF> showtelnet
Telnet status:enabled
0 Successful completion.
>0 An error occurred.