FUJITSU M8000 User Manual
Page 28
Intro(8)
6
SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
showroute
display routing information for an XSCF network interface
showshutdowndelay
show the shutdown wait time at power interruption of the
uninterruptible power supply (UPS)
showsmtp
display the Simple Mail Transfer Protocol (SMTP)
configuration information
showsnmp
display the configuration information and current status of
the SNMP agent
showsnmpusm
display the current User-based Security Model (USM)
information for the SNMP agent
showsnmpvacm
display the current View-based Access Control Access
(VACM) information for the SNMP agent
showssh
display the settings of the Secure Shell (SSH) service that
configured for the XSCF network
showstatus
display the degraded Field Replaceable Units (FRUs)
showsunmc
show setup information and status of Sun Management
Center agent
showtelnet
display the current status of the telnet service for the XSCF
network
showtimezone
display the XSCF time zone and Daylight Saving Time
information of current settings
showuser
display user account information
snapshot
collect and transfer environment, log, error, and FRUID
data
switchscf
switch the XSCF unit between the active and standby states
testsb
perform an initial diagnosis of the specified physical system
board (PSB)
traceroute
display the route packets take to the specified network host
or the network device
unlockmaintenance
forcibly release the locked status of XSCF
version
display firmware version
viewaudit
display audit records
who
display a list of the user accounts who are logged in to the
XSCF