FUJITSU M8000 - Manual (Page 168)

setarchiving(8)
146 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2009
OPTIONS The following options are supported:
-h Displays usage statement.
When used with other options or operands, an error
occurs.
-k host-key Sets the public key that XSCF uses to verify the
identity of the host. Possible values for the host-key are
shown here:
none
This literal value specifies that a public key should not
be used to authenticate the archive host. If an archive
host public key was previously configured, it is deleted.
download
This literal value specifies that setarchiving
should download the public host key from the archive
host using the SSH protocol. If the -t option is used,
setarchiving
downloads the key from the host
specified in the argument to -t. Otherwise,
setarchiving
downloads the key from the current
archive host. Next, setarchiving displays the key’s
md5
fingerprint and prompts you for confirmation of
the identity of the host to continue. If you accept the
key, it is saved and used for server authentication. If
you reject the key, setarchiving exits without
changing the configuration.
public-key
The specified public key is stored and used for server
authentication. The
host-key argument should be the
complete public-key for the archive host, beginning
with the key type.
Note – The public-key should be enclosed in quotes to
ensure that the shell treats it as a single word.